Because the workers only know how to use the injection molding machine, but they don’t know how to solve the failure when the injection molding machine fails. To know why the vertical rotary basin machine does not run, the reason for its failure is to be found. The common reasons for the failure of the injection molding machine are as follows: nozzle temperature, injection speed and injection pressure.

1. Nozzle temperature

When the injection molding machine runs for a long time, there is no time to rest, and the high-temperature nozzle can not resist the high-intensity work. At this time, the temperature of the nozzle will continue to rise. When it rises to the critical point of the nozzle, the nozzle will be damaged and stop working.

 

2. Injection temperature

Generally speaking, the faster the injection speed is, the faster the injection speed will be. However, due to the influence of air, the injection speed is from high to low, and the speed of the nozzle part is much higher than that of the mold. At this time, the slower the injection speed of the mold is, the easier it will solidify, resulting in the solidification of the fluid before it reaches the position.

 

Such vertical rotating basin machine injection molding failure leads to the production of defective products, so workers will think that it is injection molding machine failure, at this time, after adjusting the injection speed, there will be no such defective products.

3. Injection pressure

Injection pressure is a common fault reason of injection molding machine. If the injection molding machine wants to inject fluid, it needs pressure. If the injection molding machine has no pressure, it can’t send raw materials into the injection mold. Therefore, when the injection pressure is insufficient, it is necessary to check whether its press is damaged.

 

In a word, the common problems of vertical rotary basin machine injection mainly have the above three kinds, and these three kinds of problems can also be adjusted in time, do not have to scrap, as long as you adjust the parameters or replace parts can continue to use.